The 20″ NutBall..Its what you get when you
combine a Pizza Box
Flyer with a Smart Dart,

Get the best of both worlds. Its round, and it flies
like crazy; hence the name.
It can be set up for flying from mild to wild. Its an
easy quick build, so any repairs are a breeze.
Theres no nose or tail to break of, and the wing
cant fold. As a trainer it can fly slower than slow,
super stable and no bad habits. Turn up the volume
for advanced flying or silly fun. It flies almost as if it
has aileronsrolls, loops, snaps and spins both
ways, it flies inverted, the prop hangs like a full
blown 3D machine, and it has no pitch problems
at high speedThe Nutball is the Solution
to the everyday Boring Foamie.

Designed by Frank Weaver, the Nutball is an outstanding trainer that is exceptionally easy to Fly. But if you’re a Nut, just turn up the throttle and the controls, and your heart rate is Guaranteed to Rise. I am totally amazed at how maneuverable this plane is, much more than most combat planes. Hovering and Harriers are a breeze.
Lightweight Flexible EPP Foam Airframe
Bounces Back from Mishaps with the Ground.
Less Repair, More Flying!
Extremely Easy to Repair at the Field using Standard CA.
Repairs are Fast, Simple and Invisible.
Very Easy to Assemble. All Parts Lock in Place.
Build it Quick, Go Fly!
Kits Contains All Control Linkages.
No Need to Run to the Store.
Lots of Carbon. Engineered to be Flexible, yet stiff, in Flight.
All Control Surfaces come Pre-Beveled.
Spend your time FLYING not BUILDING!

Here’s What You Get:
9 mm EPP Laser Cut Parts, Slot and Tab Construction
Wheels
Wire Landing Gear
Control Rods
Control Horns
Wood Motor Mount
All the Carbon you Need

Requires
Brushless motor, 20-30 gram
2S 500 to 800 mah lipo
10amp esc
2 of 5 gram servos
Plus 4 chan TX/RX (dont need no fancy mixing or expo ! )

Price is $64.00 NZD, New Zealand Customers only
Click Here to go to the shop

Made from 6mm Depron, lasercut, also includes all needed hardware, motor mount, control horns/rods and Landing gear.

Weight RTF (minus battery) is 195 grams
Wing Span is 825 mm

List Price $68.00 NZD Only available to NZ Shoppers
Click Here to go to the store

One of my customers commented on the V2 Lil Moe that the distance from the tail to the wings was a bit short (thanks Sarge), you will be happy to note that that was one of the areas changed on this V3 update.

The V2 version was screen printed with Graphics, this version has them as stickers, your choice to use them, or do you own custom design.

LiL MOE from Budget RC is designed
for intermediate pilots who enjoy indoor
or outdoor flying.
These Pilots must also enjoy Easy to fly,
Easy to assemble and Easy to manage
Crazy Aerobatics.

Interlocking Depron Parts
Wide Fuselage (Loves Knife Edge)
Large Rudder (Turns on a dime)
3D Capable
Small enough to go Anywhere, Anytime
Kevlar string to reinforce the wings
All the Carbon you need
Wheels
Control Linkage

Thats what I love about the kits from Budget RC, they include everything you need, wheels, motor mounts and control horns/linkages – no scavenging around your bits box trying to find those little bits to complete the build.

This kit requires a 2S 300 to 500 mah battery, 3 of 3 to 5 gram servos, a 15 to 20 gram 1700 kv motor, 8 by 4 DD prop, 10 amp brushless ESC and depron safe glue. Also a 4 channel TX/micro RX and I definatelly recomend some expo for this machine

Here is a video of the Lil Moe V3 in a 10 mph breeze !

Also have the smaller 16″ version on order as well, price to be confirmed but should be $50 NZD